|Designation||Value||Unit: metric (US)|
|Maximum Material Pressure||10 (150)||bar (psi)|
|Maximum Number of Colors||24|
|Moduclean without return||1514628|
|Moduclean with return - Europe||1514627|
|Moduclean outlet base plate for flowmeter with integrated ball regulator (vertical connection)||910000309|
|Moduclean outlet base plate with integrated ball regulator (reverse position)||910001604|
|Moduclean outlet base palte with integrated ball regulator||910001891|
|Moduclean inlet slice Europe/US||1519870|
|Moduclean outlet slice - 1 outlet - Europe||1519871|
|Moduclean Outlet base plate for flowmeter (horizontal connection)||856040|
|Moduclean block without return >6 colors||Contact us|
|Moduclean block with return 4 colors||910001367|
|Moduclean block with return 6 colors||910001368|
|Moduclean block with return 2 colors||910001366|
|Moduclean block without return 4 colors||910001349|
|Moduclean block without return 2 colors||910001348|
|Moduclean block without return 6 colors||910001350|
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.
The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.
Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.
A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.
Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.