NANOBELL 803 Automatic Electrostatic Rotary Bell Atomizer
- General Industry Premium Finishing
- High Transfer Efficiency
- Easy to Integrate, Operate and Maintain
General Industry Premium Finishing - Finest and most uniform atomization
SAMES KREMLIN has more than 50 years of experience and knowledge in bell spraying technology. The Nanobell 803 allows full control of droplet sizes for constant patterns and smooth appearances. In addition, the patented NW (Narrow to Wide) air shrouds improve and refine the application. The straight and vortex air combination is fully adjustable for a variable pattern size to fit the shape of the part.
High Transfer Efficiency - Huge Paint Savings
Power is nothing without control! This is the reason why our GNM300 Control Module is perfectly managing the high voltage performances to generate an outstanding wrap-around effect. In parallel, our Bell Speed Controller, BSC300, flawlessly regulates the speed of the air motor for the best centrifugal effect drastically reducing overspray
As a result, the Transfer Efficiency is up to 40% higher than any Airspray Automatic gun with huge paint savings.
Easy to integrate, operate and maintain - Peace of mind
The NANOBELL 803 is so easy to operate that no specific skills are required to manage the few parameters controlling the atomizer. The components of the NANOBELL 803 are so robust that the number of wear parts is very limited providing easy maintenance. Easy to integrate, the NANOBELL 803 is ATEX Certified in Category 2 for an installation in Zone 1 with limited and simple safety procedures and devices.
|Designation||Value||Unit: metric (US)|
|Maximum Material Pressure||10 (145)||bar (psi)|
|Standard Material Supply Pressure||6-8 (87-116)||bar (psi)|
|Maximum Paint Flow||800 (0.21)||cc/min (gal/min)|
|Standard Paint Flow||400 (0.1)||cc/min (gal/min)|
|Minimum Paint Flow||30 (0.008)||cc/min (gal/min)|
|Maximum Air Pressure||7 (101)||bar (psi)|
|Weight||3.5 (7.7)||kg (oz)|
|Shaping Air Consumption (min-max)||200-900||Nl/min|
|Bearing Air Consumption||125||Nl/min|
|Pilot Air Consumption||10||Nl/min|
|Rotation Speed||65 000||rpm|
|Viscosity Scale (min-max)(seconds FORD Cup#4)||12 - 40||s|
|ATEX Certification||II 2 G 350 mJ < Ex < 2J|
|High Voltage Unit||HVU 810|
|High Voltage Control Module||GNM300: II (2) G [350 mJ < Ex < 2J]|
|NANOBELL 803 - Straight Version Internal Charge Water-Borne||910030961|
|NANOBELL 803 - Straight Version Solvent-Borne High Resistivity||910029588|
|NANOBELL 803 - Straight Version Solvent-Borne Low Resistivity||910030960|
|NANOBELL 803 - Straight Version Solvent-Borne High Resistivity - 2K||910032175|
|NANOBELL 803 - Straight Version Solvent-Borne Low Resistivity - 2K||910032388|
|NANOBELL 803 - Straight Version Internal Charge Water-Borne - 2K||910032176|
|EX65 Bell Cup Tool||1204427|
|EC50 Bell Cup Tool||900000803|
|Trapezoidal tool for clipped fittings||900002665|
|EC35 Bell Cup Tool||900005784|
|Installation / Removal tool for T8 outer cover||900017715|
|Installation / Removal tool for Nano 5 Valves||900019557|
|Installation / Removal tool for body||900019642|
|Installation / Removal tool for Low Voltage Connection||900019783|
|Removal tool for injector||910000700|
|50 NW Air shroud||900018225|
|35 NW Air shroud||900018351|
|65 NW Air shroud||900018362|
|BELL CUP EC35 Aluminum||910000636|
|BELL CUP EC50 Aluminum||910003159|
|BELL CUP EX65 Aluminum||910004615|
|BELL CUP EC50 Titanium||910008756|
|BELL CUP EX65 Titanium||910009383|
|BELL CUP EC35 Titanium||910011188|
|O-Ring Kit for T8 Exterior Flange||910027917|
|O-Ring Kit for T8 Interior Flange||910027918|
|O-Ring Kit for T8 Air Motor front face||910028462|
|High Voltage Unit - HVU 810||910028548|
|Nano 5 Valve||910029032|
|O-Ring Kit for body (QD Plate Side)||910031012|
|O-Ring Kit for body (Air Motor Side)||910031013|
Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.
Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.
UV coatings can be formulated up to 100% solids so that they have no volatile component that contributes to pollution.
Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.
UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.
The UV polyurethane multi-components are especially designed for very strong UV stability. Mixing with hardener gives very high durability & UV resistance.
The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.
The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.
Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.
A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.
Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.