Nanogun Airspray Low Pressure Manual Electrostatic Gun
- High Transfer Efficiency for unrivaled paint savings
- Optimum Coverage for outstanding finishing application
- The Lightest electrostatic gun for the comfort of the operators
Taking full advantage of our 70 years of expertise with electrostatic technology, SAMES KREMLIN has developed the only electrostatic gun to spray with BOTH high Voltage and high Current, certifying optimal paint charge and efficient paint transportation to the part. This combination delivers up to 20% higher transfer efficiency compared to previous gun designs.
The Nanogun Airspray, low pressure manual electrostatic gun, is suitable for many markets, such as aerospace, agricultural & construction, metallic furniture, wood and automotive industries.
Paint may be supplied to the gun via a pump, a pressure tank or a circulating. When spraying, the charged paint drops will follow the lines of the electric field to the part. Electrostatics produce a paint savings and wraparound effect which reduces overspray and pollution. Adding compressed air to it allows enhanced penetration into cavities.
|Designation||Value||Unit: metric (US)|
|Maximum Fluid Pressure||7 (101)||bar (psi)|
|Maximum Fluid Outlet||750 (25)||cc/min (oz/min)|
|Minimum Fluid Outlet||100 (3.38)||cc/min (oz/min)|
|Maximum Air Pressure||7 (101)||bar (psi)|
|Maximum Fluid Temperature||45 (113)||°C (°F)|
|Trigger Lock Safety||♦|
|Recommended Material Viscosity Range||14 - 50||s CA4|
|High Voltage (maximum)||60||kV|
|Weight||488 (17)||g (oz)|
|ATEX Certification||II 2 G 0.24 mJ|
|High Voltage Control Module||GNM6080: II (2) G [0.24 mJ]|
|Designation||Resistivity (High/Medium/Low)||Coil||Spray type||Nozzle size||Spray Width||Hose length||Part number|
|NANOGUN AIRSPRAY||High||Flat||37 cm||7.5 m (25 ft)||910017223-07|
|NANOGUN AIRSPRAY||High||Round||8 mm (.315 in)||20 cm||7.5 m (25 ft)||910017224-07|
|NANOGUN AIRSPRAY||High||Round||12 mm (.472 in)||21 cm||7.5 m (25 ft)||910017741-07|
|NANOGUN AIRSPRAY||High||◆||Flat||37 cm||7.5 m (25 ft)||910020036-07|
|NANOGUN AIRSPRAY||High||◆||Round||8 mm (.315 in)||20 cm||7.5 m (25 ft)||910022359-07|
|NANOGUN AIRSPRAY||High||Flat||37 cm||15 m (50 ft)||910017223-15|
|NANOGUN AIRSPRAY||High||Round||8 mm (.315 in)||20 cm||15 m (50 ft)||910017224-15|
|NANOGUN AIRSPRAY||High||Round||12 mm (.472 in)||21 cm||15 m (50 ft)||910017741-15|
|NANOGUN AIRSPRAY||High||Flat||37 cm||25 m (80 ft)||910017223-25|
|NANOGUN AIRSPRAY||Medium||Flat||37 cm||7.5 m (25 ft)||910025622-07|
|NANOGUN AIRSPRAY||Medium||Round||8 mm (.315 in)||20 cm||7.5 m (25 ft)||910025620-07|
|NANOGUN AIRSPRAY||Medium||Round||12 mm (.472 in)||21 cm||7.5 m (25 ft)||910025621-07|
|NANOGUN AIRSPRAY||Medium||Flat||37 cm||15 m (50 ft)||910025622-15|
|NANOGUN AIRSPRAY||Medium||Round||8 mm (.315 in)||20 cm||15 m (50 ft)||910025620-15|
|NANOGUN AIRSPRAY||Medium||Round||12 mm (.472 in)||21 cm||15 m (50 ft)||910025621-15|
|NANOGUN AIRSPRAY||Low||Flat||37 cm||7.5 m (25 ft)||910017221-07|
|NANOGUN AIRSPRAY||Low||Round||6 mm (.236 in)||19 cm||7.5 m (25 ft)||910022100-07|
|NANOGUN AIRSPRAY||Low||Round||8 mm (.315 in)||20 cm||7.5 m (25 ft)||910017222-07|
|NANOGUN AIRSPRAY||Low||Round||12 mm (.472 in)||21 cm||7.5 m (25 ft)||910017742-07|
|NANOGUN AIRSPRAY||Low||Flat||37 cm||15 m (50 ft)||910017221-15|
|NANOGUN AIRSPRAY||Low||Round||8 mm (.315 in)||20 cm||15 m (50 ft)||910017222-15|
|NANOGUN AIRSPRAY||Low||Round||12 mm (.472 in)||21 cm||15 m (50 ft)||910017742-15|
|NANOGUN AIRSPRAY||Low||Round||8 mm (.315 in)||20 cm||25 m (80 ft)||910017222-25|
|Fan spray air cap||900009014|
|Fan spray nozzle||1406402|
|Round spray 6 mm (.236 in) air cap||900011365|
|Round spray 6 mm (.236 in) nozzle||910018322|
|Round spray 8 mm (.315 in) air cap||900010503|
|Round spray 8 mm (.315 in) nozzle||910003847|
|Round spray 12 mm (.472 in) air cap||900010504|
|Round spray 12 mm (.472 in) nozzle||910003920|
|Maintenance Seal Kit for Nanogun Airspray||910021244|
Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.
Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied & low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics). The penetrant may be applied to all non-ferrous materials & ferrous materials, although for ferrous components magnetic particle inspection is often used instead for its sub-surface detection capability.
Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.
The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.
Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.
A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.
Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.
This solution is a simple concept supplying water-based paint to one painter with additional electrostatic effect.
This solution is a simple AIRSPRAY concept using our ISOCUBE for spraying water-based paint with an additional electrostatic effect